| Desert Warrior Products: AR15, M16 & M4 Quality Accessories - GG&G, Sling Adapter slic, AR15 Butt Stock, AR15 Rails, AR15 Grips, AR15 Sights, AR15 Slings, AR15 Magazines, AR15 Uppers |
Vertical Foregrip Re-Designed & 40% Lower Price
"NoTools Needed" Tri-Grip Waterproof Cap And Compartment To Hold Spare Bolt
"NoTools Needed" Tri-Grip Waterproof Cap And Compartment To Hold Spare Bolt
We are pleased to announce that through joint
kinematics manufacturing we are now able to offer the
GG&G Vertical Foregrip at a greatly reduced price
while still maintaining the quality. The GG&G Vertical
Foregrip for AR15 and M16 rifles has always provided
more than the standard vertical grips. It is made of the
highest quality materials and features and a core with a
waterproof compartment to store batteries and other
small items. The newly redesigned GG&G Vertical
Foregrip is another step up-offering three great
additional features at a greatly reduced price. Not only
does this vertical forend grip offer a very stable vertical
grip, but the new waterproof compartment will now
accommodate an AR15/M16 spare bolt. The interior of
the "O" ring sealed waterproof compartment has been
re-configured to securely hold the bolt in place - NO
RATTLES HERE.
Another new feature of this forward grip is that you no
longer need a tool or coin to gain access to the
waterproof compartment. The waterproof compartment
cap has been re-designed with an ergonomic-no snag
tri-grip feature. The third new feature is the addition of
an alignment window to aid in the installation process.
kinematics manufacturing we are now able to offer the
GG&G Vertical Foregrip at a greatly reduced price
while still maintaining the quality. The GG&G Vertical
Foregrip for AR15 and M16 rifles has always provided
more than the standard vertical grips. It is made of the
highest quality materials and features and a core with a
waterproof compartment to store batteries and other
small items. The newly redesigned GG&G Vertical
Foregrip is another step up-offering three great
additional features at a greatly reduced price. Not only
does this vertical forend grip offer a very stable vertical
grip, but the new waterproof compartment will now
accommodate an AR15/M16 spare bolt. The interior of
the "O" ring sealed waterproof compartment has been
re-configured to securely hold the bolt in place - NO
RATTLES HERE.
Another new feature of this forward grip is that you no
longer need a tool or coin to gain access to the
waterproof compartment. The waterproof compartment
cap has been re-designed with an ergonomic-no snag
tri-grip feature. The third new feature is the addition of
an alignment window to aid in the installation process.
|
AR/15/M16 Under Forearm Integrated Rail (UFIR)
As Selected By Picatinny Arsenal For PM Soldier Program
As Selected By Picatinny Arsenal For PM Soldier Program
Over nine years ago, GG&G introduced an inexpensive but
mission ready Under Forearm Integrated Rail (UFIR) that
permits instant installation and removal of most vertical
foregrips, flashlights and numerous other accessories on
the AR15/M16 weapon systems. This adapter rail can easily
be installed onto the underside of an AR15 or M16 forearm,
(standard or M4), using simple hand tools and a small
amount of Loctite 262. The three point mounting system
insures a solid, rugged mounting platform. Because our
handguard rail mount follows the Picatinny Rail
(MIL-STD-1913 or NATO's STANAG 2324) standard you will
have no problem with accessory compatibility.
Installation does not require permanent alteration to the
forearm. Detailed instructions and all of the parts required
are supplied in the kit. The UFIR is manufactured from solid
6061 T6 billet aluminum alloy and is Type III hard-coat
anodized matte black per mil-spec to provide combat
durability. The GG&G UFIR is four inches long, provides
eleven mounting cross lugs and machined to MIL-STD-1913
specifications so as to provide tactical flexibility in accessory
mounting. It is lightweight too-at only 1.6 ounces.
mission ready Under Forearm Integrated Rail (UFIR) that
permits instant installation and removal of most vertical
foregrips, flashlights and numerous other accessories on
the AR15/M16 weapon systems. This adapter rail can easily
be installed onto the underside of an AR15 or M16 forearm,
(standard or M4), using simple hand tools and a small
amount of Loctite 262. The three point mounting system
insures a solid, rugged mounting platform. Because our
handguard rail mount follows the Picatinny Rail
(MIL-STD-1913 or NATO's STANAG 2324) standard you will
have no problem with accessory compatibility.
Installation does not require permanent alteration to the
forearm. Detailed instructions and all of the parts required
are supplied in the kit. The UFIR is manufactured from solid
6061 T6 billet aluminum alloy and is Type III hard-coat
anodized matte black per mil-spec to provide combat
durability. The GG&G UFIR is four inches long, provides
eleven mounting cross lugs and machined to MIL-STD-1913
specifications so as to provide tactical flexibility in accessory
mounting. It is lightweight too-at only 1.6 ounces.
AR/15/M16 Under Forearm
|
Offset Tactical Flashlight Mount
For Use With Vertical Foregrips
For Use With Vertical Foregrips
Flashlights attached to shoulder-mounted weaponry are a
necessary requirement for urban warfare. Until now,
attempting to use a tactical flashlight in conjunction with a
vertical foregrip resulted in three scenarios: 1.Purchase an
expensive combination vertical foregrip/flashlight. 2.While
trying to maintain a grip on the vertical foregrip, attempt an
uncomfortable and dangerous rotation of the grip hand to
try to get the thumb high enough to engage the rear of the
flashlight typically mounted at the three o'clock or nine
o'clock position (strong left shooter). 3.Use an expensive
and somewhat messy pig tail with a pressure pad glued to
the foregrip or forearm that could hang you up at a critical
time.
GG&G's staff has solved the problem of interfacing a
vertical foregrip with a weapon-mounted flashlight by
creating the Offset Tactical Flashlight Mount For Use With
Vertical Foregrips. It places the tactical flashlight, offset to
the right or left of the weapon's forearm at about 5 o'clock or
7 o'clock, respectively. This permits the operator to
manipulate with the thumb, the illuminator's rocker switch
laser button or rear pressure button of other tactical
flashlights, while the support hand remains solidly on the
vertical foregrip. This tactical light mount comes complete
with both the Glock style and MIL-STD-1913 Picatinny rails.
The Glock style rail can be easily removed and a short
section of MIL-STD-1913 rail installed for attaching a
Surefire or other small flashlight by means of a standard
ring. The mounting rails are fully interchangeable. It is a
lightweight accessory at only 2.7 ounces.
necessary requirement for urban warfare. Until now,
attempting to use a tactical flashlight in conjunction with a
vertical foregrip resulted in three scenarios: 1.Purchase an
expensive combination vertical foregrip/flashlight. 2.While
trying to maintain a grip on the vertical foregrip, attempt an
uncomfortable and dangerous rotation of the grip hand to
try to get the thumb high enough to engage the rear of the
flashlight typically mounted at the three o'clock or nine
o'clock position (strong left shooter). 3.Use an expensive
and somewhat messy pig tail with a pressure pad glued to
the foregrip or forearm that could hang you up at a critical
time.
GG&G's staff has solved the problem of interfacing a
vertical foregrip with a weapon-mounted flashlight by
creating the Offset Tactical Flashlight Mount For Use With
Vertical Foregrips. It places the tactical flashlight, offset to
the right or left of the weapon's forearm at about 5 o'clock or
7 o'clock, respectively. This permits the operator to
manipulate with the thumb, the illuminator's rocker switch
laser button or rear pressure button of other tactical
flashlights, while the support hand remains solidly on the
vertical foregrip. This tactical light mount comes complete
with both the Glock style and MIL-STD-1913 Picatinny rails.
The Glock style rail can be easily removed and a short
section of MIL-STD-1913 rail installed for attaching a
Surefire or other small flashlight by means of a standard
ring. The mounting rails are fully interchangeable. It is a
lightweight accessory at only 2.7 ounces.
The Offset Tactical Flashlight Mount For Use With
Vertical Foregrips can be mounted on the GG&G UFIR, or
any of the GG&G Tactical Modular Forearms, or any other
integrated rail system. This ambidextrous mount is
attached by means of a squeeze rail. Manufactured from
aircraft grade 6061 billet aluminum alloy, it has been Type
III hard-coat anodized per mil-spec in a matte black
combat finish.
Vertical Foregrips can be mounted on the GG&G UFIR, or
any of the GG&G Tactical Modular Forearms, or any other
integrated rail system. This ambidextrous mount is
attached by means of a squeeze rail. Manufactured from
aircraft grade 6061 billet aluminum alloy, it has been Type
III hard-coat anodized per mil-spec in a matte black
combat finish.
|
Harris Bipod Adapter Solid Billet-Solid Mounting
The Harris Bipod is probably the most popular budget
priced bipod in the market today. Unfortunately it does not
easily attach to Weaver or MIL-STD-1913 dovetails. We
thought it was time to offer an extremely rugged and low
profile Harris Bipod Adapter to fill this important
requirement. Features of the GG&G Bipod Adapter include
a counter sunk locking cross bolt that helps eliminate the
possibility of snags. The clamping side bar is recessed into
the overall body of the adapter to provide a smooth overall
appearance, and solid clamping engagement, even on
undersize or worn dovetails.
Harris Bipod Adapters are manufactured from solid billet
6061 T6 aluminum and are Type III hard anodized in a
matte black non reflective finish to meet mil-spec.
priced bipod in the market today. Unfortunately it does not
easily attach to Weaver or MIL-STD-1913 dovetails. We
thought it was time to offer an extremely rugged and low
profile Harris Bipod Adapter to fill this important
requirement. Features of the GG&G Bipod Adapter include
a counter sunk locking cross bolt that helps eliminate the
possibility of snags. The clamping side bar is recessed into
the overall body of the adapter to provide a smooth overall
appearance, and solid clamping engagement, even on
undersize or worn dovetails.
Harris Bipod Adapters are manufactured from solid billet
6061 T6 aluminum and are Type III hard anodized in a
matte black non reflective finish to meet mil-spec.
Harris Bipod Adapter
|
Forearm Mounting Rail For Tactical Illuminators
Lightweight And Easily Installed
Lightweight And Easily Installed
The MIL-STD-1913 Tactical Illuminator Mounting Rail is
designed to fit those small 1913 flashlight models that are
designed to directly interface with a MIL-STD-1913 rail. At a
length of under two inches and a weight of just over 1/2
ounce. This forearm illuminator mounting rail is as compact
and lightweight as the lights themselves. This new tactical
light rail mount is machined from solid billet 6061 T6 aircraft
grade aluminum alloy using modern CNC machinery. After
being dehorned and bead blasted the mount is Type III
hard-coat anodized matte black to mil-spec, so as to
provide a hard combat proven finish.
The MIL-Spec-1913 light rail for the AR15/M16 series of
rifles can be easily installed by the operator with basic hand
tools. We recommend that the illuminator rail be attached to
the handguard in a location where both the momentary-on
(rotate counter-clockwise) and constant-on (rotate
clockwise) switch assembly can be reached by the index
finger of the support hand. For a right-handed operator this
will usually be on the front of the top handguard just to the
right of the centerline.
designed to fit those small 1913 flashlight models that are
designed to directly interface with a MIL-STD-1913 rail. At a
length of under two inches and a weight of just over 1/2
ounce. This forearm illuminator mounting rail is as compact
and lightweight as the lights themselves. This new tactical
light rail mount is machined from solid billet 6061 T6 aircraft
grade aluminum alloy using modern CNC machinery. After
being dehorned and bead blasted the mount is Type III
hard-coat anodized matte black to mil-spec, so as to
provide a hard combat proven finish.
The MIL-Spec-1913 light rail for the AR15/M16 series of
rifles can be easily installed by the operator with basic hand
tools. We recommend that the illuminator rail be attached to
the handguard in a location where both the momentary-on
(rotate counter-clockwise) and constant-on (rotate
clockwise) switch assembly can be reached by the index
finger of the support hand. For a right-handed operator this
will usually be on the front of the top handguard just to the
right of the centerline.
|
The ETI Under Foregrip Integrated Rail For
AR15/M16 Rifle Forearms(ETI UFIR)
AR15/M16 Rifle Forearms(ETI UFIR)
Although the M4 configured weapon system is extremely
popular today, we have had many requests from our
customers to manufacture a MIL-STD-1913 Under Forearm
Integrated Rail for the AR15/M16 Rifle. The new GG&G ETI
UFIR is in response to those requests. What makes it
extremely unique, is that it can be installed into the vent
holes of the lower handguard without removing it from the
weapon. In addition, no backing bushing, nut-serts or
miscellaneous fastners of any kind are required. The patent
pending integral camming attachment system allows the rail
to be easily installed and removed with a flat tip screwdriver
without any alteration to the handguard.
The ETI UFIR at just over 5 inches long is manufactured
from 6061-T6 aluminum alloy and is Type III hard-coat
anodized matte black to mil-spec. All steel components are
manganese phosphated black. Lightweight at only 1.9oz,
the GG&G ETI UFIR provides the end user with a
MIL-STD-1913 dovetail on the lower handguard to mount a
flashlight, bipod or other ancillary equipment.
popular today, we have had many requests from our
customers to manufacture a MIL-STD-1913 Under Forearm
Integrated Rail for the AR15/M16 Rifle. The new GG&G ETI
UFIR is in response to those requests. What makes it
extremely unique, is that it can be installed into the vent
holes of the lower handguard without removing it from the
weapon. In addition, no backing bushing, nut-serts or
miscellaneous fastners of any kind are required. The patent
pending integral camming attachment system allows the rail
to be easily installed and removed with a flat tip screwdriver
without any alteration to the handguard.
The ETI UFIR at just over 5 inches long is manufactured
from 6061-T6 aluminum alloy and is Type III hard-coat
anodized matte black to mil-spec. All steel components are
manganese phosphated black. Lightweight at only 1.9oz,
the GG&G ETI UFIR provides the end user with a
MIL-STD-1913 dovetail on the lower handguard to mount a
flashlight, bipod or other ancillary equipment.
The ETI Under Foregrip Integrated Rail For
AR15/M16 Rifle Forearms(ETI UFIR)
AR15/M16 Rifle Forearms(ETI UFIR)
|
Standard Aimpoint Ring Mount
The GG&G Standard Aimpoint Ring is the most rugged standard
height Aimpoint ring available today. It is designed and
manufactured to maximize the Aimpoint's tactical features. Unlike
the copy cat and cheap knock offs available today, this ring is
manufactured from 6061 T6 solid billet aluminum and Type III
hard-coat anodized black per Mil-Spec, no shiny anodized finish,
no extrusions or out of spec cast parts here. This ring is built solid
to with stand the rigors of combat. It is attached to the base by
using a squeeze rail design incorporating a single elliptical
thumbnut. There is also a square locking cross bar for recoil
control. The ring body has a built-in insulated spare battery
compartment with a spare battery cap. This is an important
feature and it's located on the side of the ring for easy access.
Our ring is extra wide so that only one is required. In order to
co-witness with a back up iron sight and the fronts sight, the
low-profile GG&G Standard Comp M Series Ring must be
mounted on our Scout length FIRE system rail.
The GG&G Standard Aimpoint Ring is the most rugged standard
height Aimpoint ring available today. It is designed and
manufactured to maximize the Aimpoint's tactical features. Unlike
the copy cat and cheap knock offs available today, this ring is
manufactured from 6061 T6 solid billet aluminum and Type III
hard-coat anodized black per Mil-Spec, no shiny anodized finish,
no extrusions or out of spec cast parts here. This ring is built solid
to with stand the rigors of combat. It is attached to the base by
using a squeeze rail design incorporating a single elliptical
thumbnut. There is also a square locking cross bar for recoil
control. The ring body has a built-in insulated spare battery
compartment with a spare battery cap. This is an important
feature and it's located on the side of the ring for easy access.
Our ring is extra wide so that only one is required. In order to
co-witness with a back up iron sight and the fronts sight, the
low-profile GG&G Standard Comp M Series Ring must be
mounted on our Scout length FIRE system rail.
Aimpoint Mounts
|
Cantilever Aimpoint Ring Mount
If you attach an Aimpoint Comp M series red dot sight directly to
an M16/AR15 "flat-top" upper receiver's integral rail using a
conventional ring mount it will be far too low to acquire the red
dot without front sight interference, no matter what type of
cheek weld you adopt. Our Aimpoint Cantilever Ring permits
mounting the Aimpoint Comp M series scopes directly to the
receiver's integral rail with the red dot positioned above the
front sight post. Yet it's still low enough so that our MAD or
A2-Style Flip Up Rear Sights can be deployed to co-witness
directly through the Aimpoint's optics should its battery fail. The
GG&G Cantilever Ring is also designed to place the Aimpoint
Comp M series scopes far enough forward so that a night vision
monocular can be mounted to the rear in co-alignment and in
conjunction with the Aimpoint's night vision compatibility.
The newly re-designed GG&G Aimpoint Cantilever Ring is
lighter in weight, and incorporates a captivated thumbnut and
spring activated sidebar, which aides in installing the mount,
especially in low light conditions. The ring body still has a
built-in insulated spare battery compartment with a spare
battery cap, located on the side for easy access. The rugged
GG&G Cantilever Ring is manufactured from solid billet 6061
T6 aluminum and is Type III hard-coat anodized black to
mil-spec.
If you attach an Aimpoint Comp M series red dot sight directly to
an M16/AR15 "flat-top" upper receiver's integral rail using a
conventional ring mount it will be far too low to acquire the red
dot without front sight interference, no matter what type of
cheek weld you adopt. Our Aimpoint Cantilever Ring permits
mounting the Aimpoint Comp M series scopes directly to the
receiver's integral rail with the red dot positioned above the
front sight post. Yet it's still low enough so that our MAD or
A2-Style Flip Up Rear Sights can be deployed to co-witness
directly through the Aimpoint's optics should its battery fail. The
GG&G Cantilever Ring is also designed to place the Aimpoint
Comp M series scopes far enough forward so that a night vision
monocular can be mounted to the rear in co-alignment and in
conjunction with the Aimpoint's night vision compatibility.
The newly re-designed GG&G Aimpoint Cantilever Ring is
lighter in weight, and incorporates a captivated thumbnut and
spring activated sidebar, which aides in installing the mount,
especially in low light conditions. The ring body still has a
built-in insulated spare battery compartment with a spare
battery cap, located on the side for easy access. The rugged
GG&G Cantilever Ring is manufactured from solid billet 6061
T6 aluminum and is Type III hard-coat anodized black to
mil-spec.
|
Quick Release Cantilever Aimpoint Ring
Mount
Many of you have asked us to develop a quick detach system
for our combat tested Aimpoint Cantilever Ring. With the
development of our Accucam Quick Detach Locking Lever
System we are now able to fill those requests. The new
Accucam Quick Detach Aimpoint Cantilever Ring has the same
robust features as our original Aimpoint Cantilever Ring; the
body is manufactured from solid billet 6061 T6 aluminum, six
cap screws firmly hold the Aimpoint in place, and the insulated
waterproof spare battery compartment with spare battery cap
keeps the spare battery handy. The new Accucam QD Locking
Lever System provides you with a solid method to quickly install
or remove your Aimpoint from the weapon system. The
Aimpoint can quickly be installed on a dovetail rail in seconds
by rotating the Accucam Cam Lever to the locked position.
Mount
Many of you have asked us to develop a quick detach system
for our combat tested Aimpoint Cantilever Ring. With the
development of our Accucam Quick Detach Locking Lever
System we are now able to fill those requests. The new
Accucam Quick Detach Aimpoint Cantilever Ring has the same
robust features as our original Aimpoint Cantilever Ring; the
body is manufactured from solid billet 6061 T6 aluminum, six
cap screws firmly hold the Aimpoint in place, and the insulated
waterproof spare battery compartment with spare battery cap
keeps the spare battery handy. The new Accucam QD Locking
Lever System provides you with a solid method to quickly install
or remove your Aimpoint from the weapon system. The
Aimpoint can quickly be installed on a dovetail rail in seconds
by rotating the Accucam Cam Lever to the locked position.
It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. It is fully adjustable to
fit Weaver and MIL-STD 1913 dovetails. The unique design allows you to adjust the tension to accommodate out of
spec or worn dovetails. In tests, the Accucam Locking Lever System has shown to be repeatable to 1/2 MOA. The
unique finger loop design is easily operated, even with a gloved hand and the rounded design is ergonomic and
virtually snag proof. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese
phosphated black to Mil-Spec.
fit Weaver and MIL-STD 1913 dovetails. The unique design allows you to adjust the tension to accommodate out of
spec or worn dovetails. In tests, the Accucam Locking Lever System has shown to be repeatable to 1/2 MOA. The
unique finger loop design is easily operated, even with a gloved hand and the rounded design is ergonomic and
virtually snag proof. The Accucam mechanism is manufactured from solid billet 4140 steel and manganese
phosphated black to Mil-Spec.
|
EOTech Mounts
EOTech Quick Release Mount
Having a primary optic with the capability to be quickly attached and detached from a weapon system, while still
maintaining “on target” repeatability, provides a degree of tactical flexibility highly valued in urban combat. The
rugged EOTech holographic sights are excellent choices for a “red dot” optic. However up until now, adding some
type of quick detach mechanism meant mounting the sight on some other mounting platform that raised the EOTech
at least another 1/2"above the bore. Besides adversely affecting cheek weld, mounting the EOTech in this manner
no longer allowed the shooter to co-witness the EOTech sight with the iron sights of the weapon system. Because
the ACCUCAM replaces the existing mounting screw and thumbnut system of the EOTech, it does not add any
height to the EOtech. The ACCUCAM is the only QD Lever System available today that does not add height to the
EOTech.
This unique and innovative quick detach system retrofits directly to the body of the EOTech. The GG&G ACCUCAM
QD Locking Lever System replaces the EOTech socket head screw or thumbnut attachment method. No other
modifications are required. The ACCUCAM system installs in approximately ten minutes. The only tools required are
a 7/64" allen wrench and a torx head wrench, both are included in the kit. This system fits new and existing EOTech
sights that have the protective shroud and only adds 3 ounces. It is fully adjustable to fit Weaver and MIL-STD
1913 dovetails, even those that are worn or out of spec. Once installed on the EOTech the sight can be quickly
installed on a dovetail rail in seconds by rotating the ACCUCAM Cam Lever to the locked position. It can then be
quickly removed by rotating the ACCUCAM Cam Lever to the unlocked position. In tests, the ACCUCAM Locking
Lever System has shown to be repeatable to less that 1/2 MOA. The unique finger loop design is easily operated,
even with a gloved hand and the rounded design is ergonomic and virtually snag proof. Manufactured from solid
billet 4140 steel and manganese phosphated matte black to mil spec, the new GG&G ACCUCAM QD Locking Lever
System provides a solid, rugged quick detach system for your EOTech.
Having a primary optic with the capability to be quickly attached and detached from a weapon system, while still
maintaining “on target” repeatability, provides a degree of tactical flexibility highly valued in urban combat. The
rugged EOTech holographic sights are excellent choices for a “red dot” optic. However up until now, adding some
type of quick detach mechanism meant mounting the sight on some other mounting platform that raised the EOTech
at least another 1/2"above the bore. Besides adversely affecting cheek weld, mounting the EOTech in this manner
no longer allowed the shooter to co-witness the EOTech sight with the iron sights of the weapon system. Because
the ACCUCAM replaces the existing mounting screw and thumbnut system of the EOTech, it does not add any
height to the EOtech. The ACCUCAM is the only QD Lever System available today that does not add height to the
EOTech.
This unique and innovative quick detach system retrofits directly to the body of the EOTech. The GG&G ACCUCAM
QD Locking Lever System replaces the EOTech socket head screw or thumbnut attachment method. No other
modifications are required. The ACCUCAM system installs in approximately ten minutes. The only tools required are
a 7/64" allen wrench and a torx head wrench, both are included in the kit. This system fits new and existing EOTech
sights that have the protective shroud and only adds 3 ounces. It is fully adjustable to fit Weaver and MIL-STD
1913 dovetails, even those that are worn or out of spec. Once installed on the EOTech the sight can be quickly
installed on a dovetail rail in seconds by rotating the ACCUCAM Cam Lever to the locked position. It can then be
quickly removed by rotating the ACCUCAM Cam Lever to the unlocked position. In tests, the ACCUCAM Locking
Lever System has shown to be repeatable to less that 1/2 MOA. The unique finger loop design is easily operated,
even with a gloved hand and the rounded design is ergonomic and virtually snag proof. Manufactured from solid
billet 4140 steel and manganese phosphated matte black to mil spec, the new GG&G ACCUCAM QD Locking Lever
System provides a solid, rugged quick detach system for your EOTech.
|
With the development of our proprietary Accucam Quick Detach
Locking Lever System we are now able to fill many Quick
Detach mounting requirements. Two new mounts added for
2007 are the Accucam Quick Detach Standard Rail and the
Accucam Quick Detach Base With Integral 30mm Rings.
The Accucam QD Integral Ring Base is available in two different
heights to accommodate proper cheek welds. One is
specifically for the AR15/M16 weapon system and one is for
bolt guns.
The integral rings on the Accucam QD Integral Ring Base for
the AR are spaced at 4.400 inches center to center. The
height from the top of the dovetail to the centerline of the ring is
1.400 inches.
The integral rings on the Accucam QD Integral Ring Base for a
bolt gun are spaced at 4.400 inches center to center. The
height from the top of the dovetail to the centerline of the ring is
1.060 inches.
The Accucam Standard Rail is five inches long with its rail
manufactured to MIL-STD-1913. It adds 1/2 inch to the height
of the mounting platform.
Both bases are designed and manufactured to meet the rigors
of combat and professional use. Both are manufactured from
solid billet 6061 T6 aluminum alloy and have a Type III hard
coat anodized matte black mil-spec finish. All edges have been
dehorned to protect the operator. The Accucam QD Locking
Lever System provides you with a solid method to quickly install
or remove the mounting base from the weapon system.
Locking Lever System we are now able to fill many Quick
Detach mounting requirements. Two new mounts added for
2007 are the Accucam Quick Detach Standard Rail and the
Accucam Quick Detach Base With Integral 30mm Rings.
The Accucam QD Integral Ring Base is available in two different
heights to accommodate proper cheek welds. One is
specifically for the AR15/M16 weapon system and one is for
bolt guns.
The integral rings on the Accucam QD Integral Ring Base for
the AR are spaced at 4.400 inches center to center. The
height from the top of the dovetail to the centerline of the ring is
1.400 inches.
The integral rings on the Accucam QD Integral Ring Base for a
bolt gun are spaced at 4.400 inches center to center. The
height from the top of the dovetail to the centerline of the ring is
1.060 inches.
The Accucam Standard Rail is five inches long with its rail
manufactured to MIL-STD-1913. It adds 1/2 inch to the height
of the mounting platform.
Both bases are designed and manufactured to meet the rigors
of combat and professional use. Both are manufactured from
solid billet 6061 T6 aluminum alloy and have a Type III hard
coat anodized matte black mil-spec finish. All edges have been
dehorned to protect the operator. The Accucam QD Locking
Lever System provides you with a solid method to quickly install
or remove the mounting base from the weapon system.
Scope Mounts and Rings
The base can be quickly installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked
position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. It is fully
adjustable to fit Weaver and MIL-STD-1913 dovetails. The unique design allows you to adjust the tension to
accommodate out of spec or worn dovetails. In tests, the Accucam Locking Lever System has shown to be repeatable
to 1/2 MOA. The unique finger loop design is easily operated, even with a gloved hand and the rounded design is
ergonomic and virtually snag proof. The Accucam mechanism is manufactured from solid billet 4140 steel and
manganese phosphated matte black per mil-spec.
position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. It is fully
adjustable to fit Weaver and MIL-STD-1913 dovetails. The unique design allows you to adjust the tension to
accommodate out of spec or worn dovetails. In tests, the Accucam Locking Lever System has shown to be repeatable
to 1/2 MOA. The unique finger loop design is easily operated, even with a gloved hand and the rounded design is
ergonomic and virtually snag proof. The Accucam mechanism is manufactured from solid billet 4140 steel and
manganese phosphated matte black per mil-spec.
|
30MM Sniper Grade Scope Rings
Our re-designed 30mm Sniper Grade Scope Rings are not
only more ergonomic, but are lighter as well. Each ring only
weighs four ounces. Not bad for a ring manufactured from
solid billet 4140 steel. Prior to being manganese phosphate
treated with a matte black combat finish, all components of
the ring are carefully de-burred so as to eliminate any sharp
edges. The square recoil cross lug will insure a positive
engagement with the mounting rail. Four steel cap screws
attach the top portion of the ring to the ring base. These
rings are tall enough to accommodate a scope with a 56mm
objective lens and Butler Creek lens covers on a Remington
700 BDL rifle.
Our re-designed 30mm Sniper Grade Scope Rings are not
only more ergonomic, but are lighter as well. Each ring only
weighs four ounces. Not bad for a ring manufactured from
solid billet 4140 steel. Prior to being manganese phosphate
treated with a matte black combat finish, all components of
the ring are carefully de-burred so as to eliminate any sharp
edges. The square recoil cross lug will insure a positive
engagement with the mounting rail. Four steel cap screws
attach the top portion of the ring to the ring base. These
rings are tall enough to accommodate a scope with a 56mm
objective lens and Butler Creek lens covers on a Remington
700 BDL rifle.
|
30 MM Aluminum Scope Rings
A set of our Aluminum Sniper-Grade Scope Rings weighs only
4.8 ounces. The ring bodies are manufactured from
exceptionally strong 7075 T6 billet aluminum alloy. This is the
very same aluminum alloy used to manufacture Colt
M16/AR15 receivers, as well as many of their clones. Great
attention has been placed upon the design. The side bar is
significantly thicker than most to permit high-torque tightening
without the associated problem of sidebar flex. The ring cap is
held in place by four socket-head steel cap screws. These
thread into stainless steel Helicoil inserts to prevent stripping
the threads. The square-cut cross bolt and its locking nut are
manufactured from 4140 chrome moly steel.
A set of our Aluminum Sniper-Grade Scope Rings weighs only
4.8 ounces. The ring bodies are manufactured from
exceptionally strong 7075 T6 billet aluminum alloy. This is the
very same aluminum alloy used to manufacture Colt
M16/AR15 receivers, as well as many of their clones. Great
attention has been placed upon the design. The side bar is
significantly thicker than most to permit high-torque tightening
without the associated problem of sidebar flex. The ring cap is
held in place by four socket-head steel cap screws. These
thread into stainless steel Helicoil inserts to prevent stripping
the threads. The square-cut cross bolt and its locking nut are
manufactured from 4140 chrome moly steel.
Our Aluminum Sniper-Grade Scope Rings are 0.625-inch in width and are high enough to accommodate a
scope with a 56mm objective lens. They are only available in 30mm diameter. Light and yet incredibly
rugged, they set a new standard for professional scope rings for law enforcement, military and civilian use.
scope with a 56mm objective lens. They are only available in 30mm diameter. Light and yet incredibly
rugged, they set a new standard for professional scope rings for law enforcement, military and civilian use.
|
<
Extreme Duty Bipod
The newly re-designed GG&G Extreme Duty Bipod
with swiveling capability now offers a greater range
than previous versions. In addition to a stronger
pivot mechanism, the new design affords 25
degrees of cant in either direction of center. Not
only does this increase better rough terrain
adjustability, but this pivoting capability allows the
deployed bipod leg to be used as a vertical foregrip
if required for rapid transition. In addition, a tension
mechanism and adjustment knob has been added
so that the operator does not need tools to make
tension adjustments to the swivel.
The GG&G Tactical Bipod is specifically designed
and manufactured to meet current military
requirements. It is exceptionally rugged.
with swiveling capability now offers a greater range
than previous versions. In addition to a stronger
pivot mechanism, the new design affords 25
degrees of cant in either direction of center. Not
only does this increase better rough terrain
adjustability, but this pivoting capability allows the
deployed bipod leg to be used as a vertical foregrip
if required for rapid transition. In addition, a tension
mechanism and adjustment knob has been added
so that the operator does not need tools to make
tension adjustments to the swivel.
The GG&G Tactical Bipod is specifically designed
and manufactured to meet current military
requirements. It is exceptionally rugged.
It will not only withstand extreme environmental conditions from –55 degrees Fahrenheit to +155 degrees
Fahrenheit, but be operational under those conditions. With the bipod legs deployed it will withstand the
military’s three foot drop test onto a concrete floor while mounted to M14 and maintain full battle
capability. Manufactured from aircraft grade 6061 T6 aluminum alloy with extreme duty connection points
and fasteners, this swiveling bipod is still remarkably lightweight at only 11.5 oz.
Features include a 7" to 9.5" height adjustment when measured from the dovetail attachment, silent
deployment, fully adjustable legs with thumbnut adjustments, and grip tight foot pads. All aluminum parts
are bead blasted and Type III hard coat anodized per mil-spec in a non reflective matte black combat
finish. The bipod is equipped with a MIL-STD-1913 rail adapter that does not require tools for installation.
The bipod will also attach to any rifle with a 6 o’clock under barrel MIL-SPEC-1913 or Weaver type rail.
Fahrenheit, but be operational under those conditions. With the bipod legs deployed it will withstand the
military’s three foot drop test onto a concrete floor while mounted to M14 and maintain full battle
capability. Manufactured from aircraft grade 6061 T6 aluminum alloy with extreme duty connection points
and fasteners, this swiveling bipod is still remarkably lightweight at only 11.5 oz.
Features include a 7" to 9.5" height adjustment when measured from the dovetail attachment, silent
deployment, fully adjustable legs with thumbnut adjustments, and grip tight foot pads. All aluminum parts
are bead blasted and Type III hard coat anodized per mil-spec in a non reflective matte black combat
finish. The bipod is equipped with a MIL-STD-1913 rail adapter that does not require tools for installation.
The bipod will also attach to any rifle with a 6 o’clock under barrel MIL-SPEC-1913 or Weaver type rail.
Now Includes A Full 25 Degrees Of Swivel
Cant And Tool-Less Swivel Tension Adjustment
Cant And Tool-Less Swivel Tension Adjustment
|
| New Products |
| Tool House |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
EOTech Optics
Balastic Drop
For the .308
Balastic Drop
For the .308
 |
©2010, Desert Warrior Products. All rights reserved. This
entire site with its content is copyright protected. All
images are invisibly watermarked and cannot be used
without explicit agreement from Desert Warrior Products.
High Quality Rifle Accessories
Take your rifle to the next level with the products found on
our site. We are a leading the way with new and innovative
products.
entire site with its content is copyright protected. All
images are invisibly watermarked and cannot be used
without explicit agreement from Desert Warrior Products.
High Quality Rifle Accessories
Take your rifle to the next level with the products found on
our site. We are a leading the way with new and innovative
products.
We Proudly Accept
Tactical Stocks
Troy Industries
Sage International
Vltor Tactical
Troy Industries
Sage International
Vltor Tactical
Other Accessories
Magazines Cleaning Supplies
Forward Rail Replacement Parts
Soft Gases Rings & Accessories
Hard Cases Bi Pods
Slings Cheek Rest
Magazines Cleaning Supplies
Forward Rail Replacement Parts
Soft Gases Rings & Accessories
Hard Cases Bi Pods
Slings Cheek Rest
