| Desert Warrior Products: AR15, M16 & M4 Quality Accessories - GG&G, Sling Adapter slic, AR15 Butt Stock, AR15 Rails, AR15 Grips, AR15 Sights, AR15 Slings, AR15 Magazines, AR15 Uppers |
Over one hundred high quality and innovative tactical
weapon accessories are now designed and
manufactured by GG&G. We are extremely proud to
say that all of them continue to be American made by
men and women proud to be Americans.
There is little doubt that tactical flexibility is the key
requirement to success in the combat environment,
especially urban combat. We attempt to meet that
requirement in every product we design, manufacture
and market. All GG&G products are manufactured to
withstand rigorous combat conditions. No company
has devoted more time and energy in developing
high quality, innovative, mounting systems and
high-performance tactical weapon accessories than
GG&G. Our broad customer base, encompassing
civilian self defense, law enforcement and military
arenas demand an attention to detail, quality of
design and quality of manufacture above and beyond
what our competitors refer to as a high standard.
weapon accessories are now designed and
manufactured by GG&G. We are extremely proud to
say that all of them continue to be American made by
men and women proud to be Americans.
There is little doubt that tactical flexibility is the key
requirement to success in the combat environment,
especially urban combat. We attempt to meet that
requirement in every product we design, manufacture
and market. All GG&G products are manufactured to
withstand rigorous combat conditions. No company
has devoted more time and energy in developing
high quality, innovative, mounting systems and
high-performance tactical weapon accessories than
GG&G. Our broad customer base, encompassing
civilian self defense, law enforcement and military
arenas demand an attention to detail, quality of
design and quality of manufacture above and beyond
what our competitors refer to as a high standard.
GG & G Tactical AR Accessories
Dominator-1 Barreled Upper Receiver
Looking for a complete upper receiver for your AR15?
The Dominator-1 from GG&G is a fully equipped AR 15
upper receiver assembly that includes all of the urban
warfare components you're looking for, including the
combat proven A2 back up iron sight, flip up front sight
and your choice of the standard tactical forearm or the
free float version. You also have the choice of either a
1-7 twist or 1-9 twist barrel. We have tried to give you
the options to meet your specific needs and require-
ments. GG&G is your source for high quality, flat top
AR-15 uppers.
DOMINATOR-1 SPECIFICATIONS
Mil-Spec Forged 7075 Aluminum A3 Upper Receiver
With Correctly Cut Feed Ramps For Military Type M
Barrels. Complete With Forward Assist And Ejection
Port Cover.
Upper Receiver is T-marked
The Dominator-1 from GG&G is a fully equipped AR 15
upper receiver assembly that includes all of the urban
warfare components you're looking for, including the
combat proven A2 back up iron sight, flip up front sight
and your choice of the standard tactical forearm or the
free float version. You also have the choice of either a
1-7 twist or 1-9 twist barrel. We have tried to give you
the options to meet your specific needs and require-
ments. GG&G is your source for high quality, flat top
AR-15 uppers.
DOMINATOR-1 SPECIFICATIONS
Mil-Spec Forged 7075 Aluminum A3 Upper Receiver
With Correctly Cut Feed Ramps For Military Type M
Barrels. Complete With Forward Assist And Ejection
Port Cover.
Upper Receiver is T-marked
Back Up Iron Sight With Locking Detent - 16 Inch Set Up Includes Chrome Moly M203 Contoured Barrel With Your
Choice Of A 1-9 Or 1-7 Twist Rate And Flash Hider - Barrel And Chamber Are Hard-Chrome Lined - 14.5 Inch Set Up
Includes Chrome Moly-Hard Chrome Lined M203 Contoured Barrel With 1-7 Twist Rate And Flash Hider - Barrel And
Chamber Are Chrome Lined - All NFA Rules Apply - Mil-Spec Gas Tube And Delta Ring Assembly.
Flip Up Front Sight With Locking Detent Mechanism, Bayonet Lug And Ambi Sling Swivel - Your Choice Of The Standard
Tactical Forearm Or The Free Float Model - Both Are Fully Equipped With Rails And Foregrip Panels - Recoil Cross
Slots Of Upper Receiver And Tactical Forearms Are Sequentially Numbered. (T-Marked) - Aluminum Components Have
Been Type III Hard-Coat Anodized Matte Black Per Mil-Spec - Steel Components Have Been Manganese Phosphated
Matte Black Per Mil-Spec - Fully Assembled And Headspaced, Ready For Your Bolt Group And Lower Receiver.
Choice Of A 1-9 Or 1-7 Twist Rate And Flash Hider - Barrel And Chamber Are Hard-Chrome Lined - 14.5 Inch Set Up
Includes Chrome Moly-Hard Chrome Lined M203 Contoured Barrel With 1-7 Twist Rate And Flash Hider - Barrel And
Chamber Are Chrome Lined - All NFA Rules Apply - Mil-Spec Gas Tube And Delta Ring Assembly.
Flip Up Front Sight With Locking Detent Mechanism, Bayonet Lug And Ambi Sling Swivel - Your Choice Of The Standard
Tactical Forearm Or The Free Float Model - Both Are Fully Equipped With Rails And Foregrip Panels - Recoil Cross
Slots Of Upper Receiver And Tactical Forearms Are Sequentially Numbered. (T-Marked) - Aluminum Components Have
Been Type III Hard-Coat Anodized Matte Black Per Mil-Spec - Steel Components Have Been Manganese Phosphated
Matte Black Per Mil-Spec - Fully Assembled And Headspaced, Ready For Your Bolt Group And Lower Receiver.
|
A2 Back Up Iron Sight
The A2 AR-15 rear sight can be used as a co-witness
iron sight with most red dot sighting systems, as a
stand-alone sight or in conjunction with one of our
interface rails. Weighing in at just over two ounces, it
features the standard military A2-style double peep
aperture which allows for end user known point of
impact. The sight has full windage adjustment with the
tactile windage knob. One click of the windage knob
provides approximately 0.48 MOA change when
mounted on the M16A2E4 rifle and about 0.65 MOA on
the M4 carbine. Initial zero is set by adjusting the
weapons front sight post. It is low profile so that when in
the down position, it will clear most optics. The mount
body and sight stem are manufactured from billet 6061
T6 aluminum alloy and Type III hard coat anodized in a
non-reflective black mil-spec finish to provide combat
durability. All steel components are black manganese
phosphated per mil-spec. These are the same back up
iron sights used by elite armed forces and law
enforcement teams world wide.
As an option you can request the XS same plane
aperture, or Trijicon Tritium aperture be factory
installed when you order the GG&G A2 BUIS.
iron sight with most red dot sighting systems, as a
stand-alone sight or in conjunction with one of our
interface rails. Weighing in at just over two ounces, it
features the standard military A2-style double peep
aperture which allows for end user known point of
impact. The sight has full windage adjustment with the
tactile windage knob. One click of the windage knob
provides approximately 0.48 MOA change when
mounted on the M16A2E4 rifle and about 0.65 MOA on
the M4 carbine. Initial zero is set by adjusting the
weapons front sight post. It is low profile so that when in
the down position, it will clear most optics. The mount
body and sight stem are manufactured from billet 6061
T6 aluminum alloy and Type III hard coat anodized in a
non-reflective black mil-spec finish to provide combat
durability. All steel components are black manganese
phosphated per mil-spec. These are the same back up
iron sights used by elite armed forces and law
enforcement teams world wide.
As an option you can request the XS same plane
aperture, or Trijicon Tritium aperture be factory
installed when you order the GG&G A2 BUIS.
|
A2 Spring Actuated BUIS Back Up Iron Sight
The GG&G A2 Spring Actuated BUIS provides the
operator with an easy-to-install push button operated
AR 15 flip up sight. The Spring Actuated A2 BUIS can
be used as a stand-alone sight or in conjunction with
one of our interface rails. It can also be used as a
co-witness iron sight with most red dot sighting
systems. Weighing in at just over 2.4 ounces, it
features the standard military A2-style double peep
aperture which allows for end user known point of
impact. The AR15 flip up rear sight has full windage
adjustment with standard military windage knob and
windage screw. No need to retrain. One click of the
windage knob provides approximately 0.48 MOA
change when mounted on the M16A2E4 rifle and
about 0.65 MOA on the M4 carbine. Initial zero is set
by adjusting the weapons front sight post. It is low
profile so that when in the down position, it will clear
most optics. The mount body and sight stem are
manufactured from solid billet 6061 T6 aluminum alloy
and Type III hard coat anodized in a non-reflective
black mil-spec finish to provide combat durability. All
steel components are black manganese phosphated
per mil-spec.
As an option you can request the XS same plane
aperture, or Trijicon Tritium aperture be installed.
Except for these optional apertures, all components
are standard M16A2 sight components
operator with an easy-to-install push button operated
AR 15 flip up sight. The Spring Actuated A2 BUIS can
be used as a stand-alone sight or in conjunction with
one of our interface rails. It can also be used as a
co-witness iron sight with most red dot sighting
systems. Weighing in at just over 2.4 ounces, it
features the standard military A2-style double peep
aperture which allows for end user known point of
impact. The AR15 flip up rear sight has full windage
adjustment with standard military windage knob and
windage screw. No need to retrain. One click of the
windage knob provides approximately 0.48 MOA
change when mounted on the M16A2E4 rifle and
about 0.65 MOA on the M4 carbine. Initial zero is set
by adjusting the weapons front sight post. It is low
profile so that when in the down position, it will clear
most optics. The mount body and sight stem are
manufactured from solid billet 6061 T6 aluminum alloy
and Type III hard coat anodized in a non-reflective
black mil-spec finish to provide combat durability. All
steel components are black manganese phosphated
per mil-spec.
As an option you can request the XS same plane
aperture, or Trijicon Tritium aperture be installed.
Except for these optional apertures, all components
are standard M16A2 sight components
|
A2 Spring Actuated BUIS
MAD BUIS Back Up Iron Sight
With Locking Mechanical Detent
With Locking Mechanical Detent
The MAD BUIS has four apertures, two of each size (so
that rotating the aperture disc in either direction will
bring the next size into view). All apertures are on the
same plane and are thus zeroed to the same point of
impact. For this reason, the MAD is sometimes referred
to as a flat top sight or a same plane sight. The aperture
disc is knurled for easier manipulation in combat
environments. The small aperture diameter is 0.073-inch
and the large aperture is 0.199-inch in diameter.
Windage adjustments are easily made with the GG&G
tactile windage knob. One click of the windage knob
provides approximately 0.48 MOA change when
mounted on the M16A2E4 rifle and about 0.65 MOA on
the M4 carbine.
The MAD mount body is CNC manufactured from billet
6061 T6 aluminum alloy and Type III hard coat anodized
in a non-reflective black mil-spec finish to provide
combat durability. The stem and aperture disc are made
from solid billet 4140 steel and have hardened wear
points for long service life. All steel components are
black manganese phosphated per mil-spec. The multiple
aperture sight overhangs the rear of the receiver by
0.200-inch. This provides a lip so that the sight can be
easily deployed even with a gloved hand. The sight stem
locks in the up position with a positive mechanical detent
system. Once placed in the up position, the sight cannot
be folded down without depressing the spring assisted
detent release button located on the left side of the sight
base. This totally eliminates the possibility of accidentally
lowering the multi aperture rear sight.
that rotating the aperture disc in either direction will
bring the next size into view). All apertures are on the
same plane and are thus zeroed to the same point of
impact. For this reason, the MAD is sometimes referred
to as a flat top sight or a same plane sight. The aperture
disc is knurled for easier manipulation in combat
environments. The small aperture diameter is 0.073-inch
and the large aperture is 0.199-inch in diameter.
Windage adjustments are easily made with the GG&G
tactile windage knob. One click of the windage knob
provides approximately 0.48 MOA change when
mounted on the M16A2E4 rifle and about 0.65 MOA on
the M4 carbine.
The MAD mount body is CNC manufactured from billet
6061 T6 aluminum alloy and Type III hard coat anodized
in a non-reflective black mil-spec finish to provide
combat durability. The stem and aperture disc are made
from solid billet 4140 steel and have hardened wear
points for long service life. All steel components are
black manganese phosphated per mil-spec. The multiple
aperture sight overhangs the rear of the receiver by
0.200-inch. This provides a lip so that the sight can be
easily deployed even with a gloved hand. The sight stem
locks in the up position with a positive mechanical detent
system. Once placed in the up position, the sight cannot
be folded down without depressing the spring assisted
detent release button located on the left side of the sight
base. This totally eliminates the possibility of accidentally
lowering the multi aperture rear sight.
The MAD is the lowest profile BUIS with a locking detent and weighs in
just over two ounces. It is now available with an option for Trijicon
Tritium night sight inserts. The MAD is used by elite armed forces and
law enforcement teams word wide. Don't forget it is compatible with
the AR10.
just over two ounces. It is now available with an option for Trijicon
Tritium night sight inserts. The MAD is used by elite armed forces and
law enforcement teams word wide. Don't forget it is compatible with
the AR10.
|
MAD Back Up Iron Sight With Ranging Aperture
The adjustable back up iron sight has all of the same
great features as the standard MAD BUIS (back up iron
sight) such as its low profile, solid 4140 steel and
6061-T6 aluminum construction, solid locking detent with
button release, and mil-spec finish. Unlike other
adjustable sights, it has one important exception: it is
also a ranging sight. The unique rotating multiple
aperture disc has 5 apertures preset to specified
distances. In particular, 0=25 and 200yds 3=300yds
4=400yds 5=500yds 6=600yds. A small window facing
the shooter, as can be seen in the above photograph,
provides a numerical cue as to the range. All apertures
are the same diameter--.070" diameter. The apertures
have been preset using the ballistic calculations for 55
grain through 62 grain ammunition used in the
AR15/M16 16" carbine length weapon.
GG&G's rotating aperture sights go beyond the
performance of a normal backup iron sight thanks to
their low profile, snug installation, and field tested
accuracy. Because our aperture rifle sights are designed
for real world tactical use by police and military
personnel, they have qualities that go beyond cheap
imported knockoffs found elsewhere. The GG&G MAD
backup iron sight with ranging aperture is a bestseller
thanks to extensive word-of-mouth endorsements by
marksmen and armorers around the globe, so you can
count on it whether you're on the range or out in the field.
great features as the standard MAD BUIS (back up iron
sight) such as its low profile, solid 4140 steel and
6061-T6 aluminum construction, solid locking detent with
button release, and mil-spec finish. Unlike other
adjustable sights, it has one important exception: it is
also a ranging sight. The unique rotating multiple
aperture disc has 5 apertures preset to specified
distances. In particular, 0=25 and 200yds 3=300yds
4=400yds 5=500yds 6=600yds. A small window facing
the shooter, as can be seen in the above photograph,
provides a numerical cue as to the range. All apertures
are the same diameter--.070" diameter. The apertures
have been preset using the ballistic calculations for 55
grain through 62 grain ammunition used in the
AR15/M16 16" carbine length weapon.
GG&G's rotating aperture sights go beyond the
performance of a normal backup iron sight thanks to
their low profile, snug installation, and field tested
accuracy. Because our aperture rifle sights are designed
for real world tactical use by police and military
personnel, they have qualities that go beyond cheap
imported knockoffs found elsewhere. The GG&G MAD
backup iron sight with ranging aperture is a bestseller
thanks to extensive word-of-mouth endorsements by
marksmen and armorers around the globe, so you can
count on it whether you're on the range or out in the field.
MAD Back Up Iron Sight With
Ranging Aperture
Ranging Aperture
|
Spring Actuated Flip Up Front Sights For Dovetails
Two Models Available
One For Dovetailed Gas Blocks
And One For Tactical Forearms
Two Models Available
One For Dovetailed Gas Blocks
And One For Tactical Forearms
The GG&G Spring Actuated Flip Up Front Sight is the
latest evolution in our Flip Up Front Sight product line for
the AR15 and M16 rifle family. With just a push of a
button the AR 15 flip up front sight can quickly be
deployed on target. With the introduction of the Spring
Actuated A2 BUIS it was only a natural progression to
provide our customers with a flip up front sight with the
same features and benefits. The unique and proprietary
design of the mechanism allows the actuator spring and
mechanical components to be captivated and therefore
not be open to environmental elements. The flip up sight
not only springs into an on target position with just the
push of the actuator button, but it also locks solidly into
the upright on target position. Another push of the button
and the lock is released allowing you to set the sight into
the locked down position. The sight cannot be folded
down without depressing the actuator button located on
the left side of the sight base. This totally eliminates the
possibility of accidentally lowering the sight. With the
actuator button located on the left side it can be easily
operated with the off hand, leaving the fire control hand
in the proper position.
There are two flip front sight models available, one to
mount on dovetailed gas blocks, which provides the
same command height as the original AR15/M16 front
sight. The sight stem of this model folds forward so as to
clear tactical forearms that would otherwise interfere with
it folding rearward. The second model is specifically
manufactured to the proper sight height for mounting on
a tactical forearm. The sight for the tactical forearm will
function well and co-witness when mounted to the tactical
forearm of an AR10. The sight stem of this version folds
rearward. Both sights can be co-witnessed with red dot
optics.
latest evolution in our Flip Up Front Sight product line for
the AR15 and M16 rifle family. With just a push of a
button the AR 15 flip up front sight can quickly be
deployed on target. With the introduction of the Spring
Actuated A2 BUIS it was only a natural progression to
provide our customers with a flip up front sight with the
same features and benefits. The unique and proprietary
design of the mechanism allows the actuator spring and
mechanical components to be captivated and therefore
not be open to environmental elements. The flip up sight
not only springs into an on target position with just the
push of the actuator button, but it also locks solidly into
the upright on target position. Another push of the button
and the lock is released allowing you to set the sight into
the locked down position. The sight cannot be folded
down without depressing the actuator button located on
the left side of the sight base. This totally eliminates the
possibility of accidentally lowering the sight. With the
actuator button located on the left side it can be easily
operated with the off hand, leaving the fire control hand
in the proper position.
There are two flip front sight models available, one to
mount on dovetailed gas blocks, which provides the
same command height as the original AR15/M16 front
sight. The sight stem of this model folds forward so as to
clear tactical forearms that would otherwise interfere with
it folding rearward. The second model is specifically
manufactured to the proper sight height for mounting on
a tactical forearm. The sight for the tactical forearm will
function well and co-witness when mounted to the tactical
forearm of an AR10. The sight stem of this version folds
rearward. Both sights can be co-witnessed with red dot
optics.
|
Bolt On Flip Up Front Sight Gas Block System
The GG&G Bolt On Flip Up Front Sight Gas Block is a top
of the line flip up front sight gas block system that is very
easy to install. The Flip Up Front Sight Gas Block is
secured in place by a Tri-Point clamping mechanism
guaranteeing consistent accuracy and trouble free
operation. The sculpted finger groove design is not only
ergonomic but allows for quick deployment. Manufactured
from 4140 chrome moly billet steel with hardened wear
points and finished by a mil-spec manganese phosphate
process, this unit is ready for rugged use. As a method of
standardization the M16A2 square front post is used,
which is fully adjustable for elevation zero. Protective ears
are provided for the sight with additional gripping
serrations to aid in raising and lowering the sight assembly.
The GG&G Bolt On Flip Up Front Sight Gas Block is
equipped with a spring-loaded, positive wedge lock detent
system that keeps the front sight in the up position
preventing accidental lowering of the unit while
maintaining on target repeatability. The clamp on front
sight locking system is designed to be operated with the
off-hand so that the fire control hand does not need to be
removed from the weapons fire control system to deploy
or lower the sight. Further, the sight comes equipped with
a standard 1 inch, ambidextrous sling swivel that bolts to
the gas block at a low position.
Additionally, there is a provision for the easy attachment
of an optional MIL-STD-1913, ambidextrous 1"- inch long
dovetail for mounting flashlights, LAMs and other small
accessories onto the gas block base.
of the line flip up front sight gas block system that is very
easy to install. The Flip Up Front Sight Gas Block is
secured in place by a Tri-Point clamping mechanism
guaranteeing consistent accuracy and trouble free
operation. The sculpted finger groove design is not only
ergonomic but allows for quick deployment. Manufactured
from 4140 chrome moly billet steel with hardened wear
points and finished by a mil-spec manganese phosphate
process, this unit is ready for rugged use. As a method of
standardization the M16A2 square front post is used,
which is fully adjustable for elevation zero. Protective ears
are provided for the sight with additional gripping
serrations to aid in raising and lowering the sight assembly.
The GG&G Bolt On Flip Up Front Sight Gas Block is
equipped with a spring-loaded, positive wedge lock detent
system that keeps the front sight in the up position
preventing accidental lowering of the unit while
maintaining on target repeatability. The clamp on front
sight locking system is designed to be operated with the
off-hand so that the fire control hand does not need to be
removed from the weapons fire control system to deploy
or lower the sight. Further, the sight comes equipped with
a standard 1 inch, ambidextrous sling swivel that bolts to
the gas block at a low position.
Additionally, there is a provision for the easy attachment
of an optional MIL-STD-1913, ambidextrous 1"- inch long
dovetail for mounting flashlights, LAMs and other small
accessories onto the gas block base.
|
Flip Up Front Sight For Dovetailed Gas Blocks
With Locking Mechanical Detent
With Locking Mechanical Detent
Many shooters feel the standard AR15 removable front
sights are cumbersome to use, too easily misplaced, and
distracting when optical sights are deployed. The GG&G
Flip Up Front Sight For Dovetailed Gas Blocks is easy to
install, simple to deploy, weighs in at only 3.2 ounces and
includes a mechanical locking detent system. It can easily
be installed by the operator onto the AR-15 dovetailed gas
block with only an allen wrench, which is included. Once
installed, the gas block sight can remain in place, as it can
be raised or lowered instantly. Protective ears are provided
for the sight with gripping serrations to more easily raise
and lower the sight assembly in combat environments. With
the mechanical locking detent, the front sight cannot be
accidentally lowered. To lower the sight the operator only
has to push a button. When in the upright position it
provides the same command height as the original AR15 or
M16 front sight and can be co-witnessed with red dot optics.
sights are cumbersome to use, too easily misplaced, and
distracting when optical sights are deployed. The GG&G
Flip Up Front Sight For Dovetailed Gas Blocks is easy to
install, simple to deploy, weighs in at only 3.2 ounces and
includes a mechanical locking detent system. It can easily
be installed by the operator onto the AR-15 dovetailed gas
block with only an allen wrench, which is included. Once
installed, the gas block sight can remain in place, as it can
be raised or lowered instantly. Protective ears are provided
for the sight with gripping serrations to more easily raise
and lower the sight assembly in combat environments. With
the mechanical locking detent, the front sight cannot be
accidentally lowered. To lower the sight the operator only
has to push a button. When in the upright position it
provides the same command height as the original AR15 or
M16 front sight and can be co-witnessed with red dot optics.
|
Tactical Modular Flip Up Front Sight Taper Pin Version
With Locking Mechanical Detent
With Locking Mechanical Detent
We re-designed and streamlined the overall appearance
and updated the locking detent mechanism. The sight is still
manufactured from 4140 chrome moly billet steel and
finished by a mil-spec manganese phosphate process. The
M16A2 square front sight post is used, which is adjustable
for elevation zero. Protective ears are provided for the sight
with gripping serrations to more easily raise and lower the
sight assembly. The redesigned mechanical lock is a spring-
loaded, positive wedge lock detent system that keeps the
front sight in the up position preventing accidental lowering
of the unit while maintaining on target repeatability. The
locking system is designed to be operated with one hand so
that the fire control hand does not need to be removed from
the weapons fire control system to deploy or lower the sight.
Further, the sight comes with a standard mil-spec 1�-inch,
ambidextrous sling swivel that bolts to the body of the sight.
There is a provision for the easy attachment of an optional
MIL-STD-1913, ambidextrous 1�-inch long dovetail for
mounting flashlights, LAMs and other small accessories onto
the gas block base. The installation process requires
removal and replacement of the taper pins that hold the A
frame sight in place. Therefore your barrel or barreled
upper receiver must be sent to us for installation of this
product. The price includes installation of the GG&G Flip Up
Front Sight, but does not include shipping.
An optional Trijicon Tritium front sight post can also be
added to enhance low light shooting capability. If purchased
with the Flip Up Front Sight, we will install the Trijicon Tritium
sight post for free.
and updated the locking detent mechanism. The sight is still
manufactured from 4140 chrome moly billet steel and
finished by a mil-spec manganese phosphate process. The
M16A2 square front sight post is used, which is adjustable
for elevation zero. Protective ears are provided for the sight
with gripping serrations to more easily raise and lower the
sight assembly. The redesigned mechanical lock is a spring-
loaded, positive wedge lock detent system that keeps the
front sight in the up position preventing accidental lowering
of the unit while maintaining on target repeatability. The
locking system is designed to be operated with one hand so
that the fire control hand does not need to be removed from
the weapons fire control system to deploy or lower the sight.
Further, the sight comes with a standard mil-spec 1�-inch,
ambidextrous sling swivel that bolts to the body of the sight.
There is a provision for the easy attachment of an optional
MIL-STD-1913, ambidextrous 1�-inch long dovetail for
mounting flashlights, LAMs and other small accessories onto
the gas block base. The installation process requires
removal and replacement of the taper pins that hold the A
frame sight in place. Therefore your barrel or barreled
upper receiver must be sent to us for installation of this
product. The price includes installation of the GG&G Flip Up
Front Sight, but does not include shipping.
An optional Trijicon Tritium front sight post can also be
added to enhance low light shooting capability. If purchased
with the Flip Up Front Sight, we will install the Trijicon Tritium
sight post for free.
|
AR15 Tactical Forearm Non-Free Floating
"Maximize product flexibility" is one of our most important
company goals. In keeping with that goal, the GG&G Tactical
Modular Forearm is the most user accommodating non-free
floating tactical forearm mount in the world today. The Tactical
Modular Forearm is easily installed on M16/AR15 carbine
length barrels including A2 carry handle configurations. All
that is required to install this rugged lightweight forearm is the
removal of the existing polymer forearm pieces. The two
halves of the Tactical Modular Forearm frame are installed
beneath the delta ring onto the barrel nut with a rigid
attachment method. The front of the forearm is installed under
the handguard cap. The innovative attachment method
provides a rock solid attachment. The installation does not
require removal of the front sight or the muzzle brake. Once
installed the AR 15 quad rail system is ready to be outfitted
with each AR15 the rail and forearm panel installed in the
locations that best suit your accessories,mission requirements
and shooting style. The unique design of this forearm and rail
system allow the end user to place rails and forearm panels at
all twelve clock positions.
The major components of the GG&G Tactical Modular
Forearm are manufactured from 6061 T6 billet aluminum and
are hard-coat anodized matte black per mil-spec. The forearm
panels are manufactured from solid acetal cold polymer. All
tactical handguard attachment points are tough stainless steel
helicoils and torx screws.
company goals. In keeping with that goal, the GG&G Tactical
Modular Forearm is the most user accommodating non-free
floating tactical forearm mount in the world today. The Tactical
Modular Forearm is easily installed on M16/AR15 carbine
length barrels including A2 carry handle configurations. All
that is required to install this rugged lightweight forearm is the
removal of the existing polymer forearm pieces. The two
halves of the Tactical Modular Forearm frame are installed
beneath the delta ring onto the barrel nut with a rigid
attachment method. The front of the forearm is installed under
the handguard cap. The innovative attachment method
provides a rock solid attachment. The installation does not
require removal of the front sight or the muzzle brake. Once
installed the AR 15 quad rail system is ready to be outfitted
with each AR15 the rail and forearm panel installed in the
locations that best suit your accessories,mission requirements
and shooting style. The unique design of this forearm and rail
system allow the end user to place rails and forearm panels at
all twelve clock positions.
The major components of the GG&G Tactical Modular
Forearm are manufactured from 6061 T6 billet aluminum and
are hard-coat anodized matte black per mil-spec. The forearm
panels are manufactured from solid acetal cold polymer. All
tactical handguard attachment points are tough stainless steel
helicoils and torx screws.
AR15 Tactical Forearm
Non-Free Floating
Non-Free Floating
The AR15 forearm kit comes complete with all mounting hardware and the following components:
(1) basic forearm assembly, (1) full and (2) half-top and bottom rails (two) halves placed together make a full rail), (2) half-top
and bottom forearm panels (two halves placed together make a full forearm panel), (2) half-side rails, (1) half-offset side rail
(ambidextrous design), and (2) half-side forearm panels. The kit also includes a torx wrench. If by chance you need an additional
rail or forearm panel, they are available as an option.
(1) basic forearm assembly, (1) full and (2) half-top and bottom rails (two) halves placed together make a full rail), (2) half-top
and bottom forearm panels (two halves placed together make a full forearm panel), (2) half-side rails, (1) half-offset side rail
(ambidextrous design), and (2) half-side forearm panels. The kit also includes a torx wrench. If by chance you need an additional
rail or forearm panel, they are available as an option.
|
AR-15 Free Floating Tactical Forearm
In keeping with one of our primary goals, "maximize product
flexibility" the new GG&G Tactical Modular Free Floating
Forearm offers the most user accommodating free floating
tactical forearm in the world today. The Tactical Modular
Free Floating Forearm is easily installed on AR15 or M16
carbine length barrels and unlike other models this free
floating forearm rail system can be mounted on A2 carry
handle configurations. As with other free float versions in
the market place, the barrel has to be removed from the
receiver for installation. The two halves of the GG&G
forearm frame are installed onto the barrel nut with a rigid
attachment method. The innovative attachment provides for
a full floating barrel. Unlike other models the installation
does not require removal of the front sight or the muzzle
brake on post ban models.
Once installed the Tactical Modular Free Floating Forearm
is ready to be outfitted with the rails and forearm panels
installed in the locations that best suit your accessories,
mission requirements and shooting style. The unique design
of this forearm, and rail system allow the end user to place
rails and forearm panels at all twelve clock positions. Unlike
other forearms in the market, the GG&G solid polymer
removable forearm panels are the same thickness as the
removable rails, so when in place, the profile is no larger
than the forearm.
The major components of the Tactical Modular Free
Floating Forearm are manufactured from billet 6061 T6
aluminum alloy and are Type III hard coat anodized in a
durable tactical non-reflective matte black finish per
mil-spec. The forearm panels are manufactured from solid
acetal cold polymer. This provides a very maneuverable
and lightweight accessory: Only 16.14 ounces. All
attachment points are stainless steel helicoils and torx
screws.
THE AR15 FOREARM KIT COMES COMPLETE WITH ALL
MOUNTING HARDWARE AND THE FOLLOWING
COMPONENTS: (1) Free floating tactical forearm assembly,
(1) full and (2) half-top and bottom rails (two halves placed
together make a full rail), (2) half-top and bottom forearm
panels (two halves placed together make a full forearm
panel), (2) half-side rails, (1) half-offset side rail
(ambidextrous design), and (2) half-side forearm
panels.The kit also includes a torx wrench. If by chance you
need an additional rail or forearm panel, they are available
as an option.
flexibility" the new GG&G Tactical Modular Free Floating
Forearm offers the most user accommodating free floating
tactical forearm in the world today. The Tactical Modular
Free Floating Forearm is easily installed on AR15 or M16
carbine length barrels and unlike other models this free
floating forearm rail system can be mounted on A2 carry
handle configurations. As with other free float versions in
the market place, the barrel has to be removed from the
receiver for installation. The two halves of the GG&G
forearm frame are installed onto the barrel nut with a rigid
attachment method. The innovative attachment provides for
a full floating barrel. Unlike other models the installation
does not require removal of the front sight or the muzzle
brake on post ban models.
Once installed the Tactical Modular Free Floating Forearm
is ready to be outfitted with the rails and forearm panels
installed in the locations that best suit your accessories,
mission requirements and shooting style. The unique design
of this forearm, and rail system allow the end user to place
rails and forearm panels at all twelve clock positions. Unlike
other forearms in the market, the GG&G solid polymer
removable forearm panels are the same thickness as the
removable rails, so when in place, the profile is no larger
than the forearm.
The major components of the Tactical Modular Free
Floating Forearm are manufactured from billet 6061 T6
aluminum alloy and are Type III hard coat anodized in a
durable tactical non-reflective matte black finish per
mil-spec. The forearm panels are manufactured from solid
acetal cold polymer. This provides a very maneuverable
and lightweight accessory: Only 16.14 ounces. All
attachment points are stainless steel helicoils and torx
screws.
THE AR15 FOREARM KIT COMES COMPLETE WITH ALL
MOUNTING HARDWARE AND THE FOLLOWING
COMPONENTS: (1) Free floating tactical forearm assembly,
(1) full and (2) half-top and bottom rails (two halves placed
together make a full rail), (2) half-top and bottom forearm
panels (two halves placed together make a full forearm
panel), (2) half-side rails, (1) half-offset side rail
(ambidextrous design), and (2) half-side forearm
panels.The kit also includes a torx wrench. If by chance you
need an additional rail or forearm panel, they are available
as an option.
|
AR-15 Free
Floating Tactical Forearm
Floating Tactical Forearm
| New Products |
| Tool House |
| For Knowledgeable Assistance 951-847-4558 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
EOTech Optics
Balastic Drop
For the .308
Balastic Drop
For the .308
 |
©2010, Desert Warrior Products. All rights reserved. This
entire site with its content is copyright protected. All
images are invisibly watermarked and cannot be used
without explicit agreement from Desert Warrior Products.
High Quality Rifle Accessories
Take your rifle to the next level with the products found on
our site. We are a leading the way with new and innovative
products.
entire site with its content is copyright protected. All
images are invisibly watermarked and cannot be used
without explicit agreement from Desert Warrior Products.
High Quality Rifle Accessories
Take your rifle to the next level with the products found on
our site. We are a leading the way with new and innovative
products.
We Proudly Accept
Knowledgeable Support Call
1-951-847-4558 for expert advice on everything we offer.
Phone Sales (Pacific Standard Time):
Mon - Fri: 9am - 4pm
Saturday: Closed
Sunday: Closed
1-951-847-4558 for expert advice on everything we offer.
Phone Sales (Pacific Standard Time):
Mon - Fri: 9am - 4pm
Saturday: Closed
Sunday: Closed
Other Accessories
Magazines Cleaning Supplies
Forward Rail Replacement Parts
Soft Gases Rings & Accessories
Hard Cases Bi Pods
Slings Cheek Rest
Magazines Cleaning Supplies
Forward Rail Replacement Parts
Soft Gases Rings & Accessories
Hard Cases Bi Pods
Slings Cheek Rest