| Welcome to Desert Warrior Products: M1A M14 Magazines. We specialize in the M1A/M14, FN FAL, Remington 700 & 870, Mini 14 and M4 M14 Accessories M1A Accessories |
| M1A & M14 Mag Pul's |
When installed on the base of a rifle magazine, the Magpul provides
unsurpassed speed and controllability during high stress, tactical
magazine changes.
Durable thermoplastic loop with recessed rough gripping surface
Quick and easy installation and removal
Patended design based upon the tried and true para-cord loops and
duct-tape tabs currently in use with special warfare units worldwide
3 Pack
unsurpassed speed and controllability during high stress, tactical
magazine changes.
Durable thermoplastic loop with recessed rough gripping surface
Quick and easy installation and removal
Patended design based upon the tried and true para-cord loops and
duct-tape tabs currently in use with special warfare units worldwide
3 Pack
Desert Warrior Products - M14 M1A Mag Pul
PART # 110003
Description: (3 Pak) Mag Pul for M1A & M14 USGI Spec'd Magazine
Color: Black
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Description: (3 Pak) Mag Pul for M1A & M14 USGI Spec'd Magazine
Color: Black
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
|
Load & Unload Magazines Fast; Saves Overworked
Fingers & Thumbs
Tough, lightweight, reinforced, black-polymer
loader/unloader saves fingers, thumbs, and wasted time;
lengthens magazine life and lessens wear and tear on
magazine lips. Staggered, triangular pieces of plastic
securely grasp rounds for effortless loading/unloading when
you move the lever back and forth. Fits in your pocket.
M1A/M14 - Fits 10-, 20-, and 30-round M1A/M14 magazines
and AR-10 magazine with rear magazine catch
Fingers & Thumbs
Tough, lightweight, reinforced, black-polymer
loader/unloader saves fingers, thumbs, and wasted time;
lengthens magazine life and lessens wear and tear on
magazine lips. Staggered, triangular pieces of plastic
securely grasp rounds for effortless loading/unloading when
you move the lever back and forth. Fits in your pocket.
M1A/M14 - Fits 10-, 20-, and 30-round M1A/M14 magazines
and AR-10 magazine with rear magazine catch
|
Hold Spare Ammo At The Ready
Clamps a second, hi-cap mag right to the one in the gun;
your extra ammo is instantly available for super fast reloads.
Stops fumbling when seconds count, holds magazines rock
solid, without scratching or damage.
Clamps a second, hi-cap mag right to the one in the gun;
your extra ammo is instantly available for super fast reloads.
Stops fumbling when seconds count, holds magazines rock
solid, without scratching or damage.
|
Desert Warrior Products - M14 M1A Mag Loader
PART # 110004
Description: Magazine Loader and Unloader
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Description: Magazine Loader and Unloader
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Desert Warrior Products - M14 M1A Magazine Cinch
PART # 110005
Description: Magazine Cinch
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Description: Magazine Cinch
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Stamped C.M.I. on rear of magazine.
Don't fall for the knock off M14 magazines that are flooding the market.
Some of the newer knock offs and imports look like genuine USGI mags
but we have not found any of these to be 100% reliable.
Real CMI magazines like the ones for sale here are made from heavier
steel, have correctly formed metal followers, a welded on (not stamped)
locking lug, mil-spec square spring, and 13 spot welds on the front of the
magazine. *** At our request CMI is now stamping mags "CMI" starting
1/5/07.
Don't fall for the knock off M14 magazines that are flooding the market.
Some of the newer knock offs and imports look like genuine USGI mags
but we have not found any of these to be 100% reliable.
Real CMI magazines like the ones for sale here are made from heavier
steel, have correctly formed metal followers, a welded on (not stamped)
locking lug, mil-spec square spring, and 13 spot welds on the front of the
magazine. *** At our request CMI is now stamping mags "CMI" starting
1/5/07.
Desert Warrior Products - M14 M1A Magazines
PART # 110001 & 110002
Description: New USGI mil-spec M14 20rd magazines from CMI. Current
US Govt issue, same magazines used by major M1A rifle manufacturer.
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Description: New USGI mil-spec M14 20rd magazines from CMI. Current
US Govt issue, same magazines used by major M1A rifle manufacturer.
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
|
Desert Warrior Products - Shell Extractor
PART # 110006
Description: 308 Shell Extractor
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Description: 308 Shell Extractor
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
|
Desert Warrior Products - Recoil Buffer
PART # 110007
Description: Buffer Technology - Recoil Buffer
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Description: Buffer Technology - Recoil Buffer
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
What Is A Recoil Buffer?? What Can It Do
For Your Gun?
A Recoil Buffer is a product designed by Buffer
Technologies to cushion the trauma your bolt
and receiver experience during normal
cartridge discharge.
Each carefully designed buffer is made from a
polyurethane with specific shock-absorbing
properties. When it is placed between the bolt
and what it slams against at the extreme range
of its travel, the buffer acts as a gentle
cushion. Without the buffer, the bolt is driven
backwards to make direct violent contact with
another piece of steel. In time, this pounding
takes its toll. The gun becomes less accurate
and the action becomes dangerously loose.
If you take your guns seriously, there's no
good reason not to consider using a Recoil
Buffer in all of them!
The M1A / M14 Recoil Buffer™ easily fits onto
the recoil spring guide. Installation takes less
than a minute and can be done during
standard disassembly.
For Your Gun?
A Recoil Buffer is a product designed by Buffer
Technologies to cushion the trauma your bolt
and receiver experience during normal
cartridge discharge.
Each carefully designed buffer is made from a
polyurethane with specific shock-absorbing
properties. When it is placed between the bolt
and what it slams against at the extreme range
of its travel, the buffer acts as a gentle
cushion. Without the buffer, the bolt is driven
backwards to make direct violent contact with
another piece of steel. In time, this pounding
takes its toll. The gun becomes less accurate
and the action becomes dangerously loose.
If you take your guns seriously, there's no
good reason not to consider using a Recoil
Buffer in all of them!
The M1A / M14 Recoil Buffer™ easily fits onto
the recoil spring guide. Installation takes less
than a minute and can be done during
standard disassembly.
The M1A / M14 is an undeniable classic. Taking good care of its action is
essential if you want to ensure that your piece of history endures. However,
every time you fire off a round the op-rod slams backward making contact with
the receiver. Gradually this can cause the action to become loose! Fortunately,
a Recoil Buffer™ can cushion this trauma and lengthen the service life of your
favorite rifle. Those who install Recoil Buffers™, including Marine Corps and
Ranger Marksmen, into their automatic firearms will not only be protecting their
investments by prolonging their service life, but they will also find that the recoil
is reduced and muzzle stability is increased. Recoil Buffers™ can do this for any
gun! They work so well that many people believe they should be installed in all
guns by their manufacturers. Unfortunately, this is not yet the case. So, until that
time comes, make sure your weapon functions as well as it possibly can!
essential if you want to ensure that your piece of history endures. However,
every time you fire off a round the op-rod slams backward making contact with
the receiver. Gradually this can cause the action to become loose! Fortunately,
a Recoil Buffer™ can cushion this trauma and lengthen the service life of your
favorite rifle. Those who install Recoil Buffers™, including Marine Corps and
Ranger Marksmen, into their automatic firearms will not only be protecting their
investments by prolonging their service life, but they will also find that the recoil
is reduced and muzzle stability is increased. Recoil Buffers™ can do this for any
gun! They work so well that many people believe they should be installed in all
guns by their manufacturers. Unfortunately, this is not yet the case. So, until that
time comes, make sure your weapon functions as well as it possibly can!
|
The Tactical Magazine Release Latch is
manufactured to original USGI specification with the
exception of the thumb pad which has been
enlarged and serrated to provide a faster,
smoother release, and a more positive grip.
The Case hardened steel has a hardness of 55 Rc
and a Mil-Spec parkerized finish
manufactured to original USGI specification with the
exception of the thumb pad which has been
enlarged and serrated to provide a faster,
smoother release, and a more positive grip.
The Case hardened steel has a hardness of 55 Rc
and a Mil-Spec parkerized finish
Desert Warrior Products - Tactical Magazine Release Latch
PART # 140040
Description: Sadlak - Magazine Release Latch
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Description: Sadlak - Magazine Release Latch
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
The vertical serrated grooves in the tab are machined in the direction the thumb
travels allowing a firm grip that results in quick magazine changes what are helpful
during the rapid portion of competition matches and other tactical operations.
The ergonomic design of the rounded edges assure comfortable use.
travels allowing a firm grip that results in quick magazine changes what are helpful
during the rapid portion of competition matches and other tactical operations.
The ergonomic design of the rounded edges assure comfortable use.
|
The new double magazine pouch is designed
around the 20 round M14 Magazine. Attaches with
the standardized Molley/Pal system and comes four
different colors. All our pouches are manufactured
out of 600 Denier Balistic Nylon.
around the 20 round M14 Magazine. Attaches with
the standardized Molley/Pal system and comes four
different colors. All our pouches are manufactured
out of 600 Denier Balistic Nylon.
Desert Warrior Products - M1A M14 Double Magazine Pouch
PART # MA24
Description: Desert Warrior Products - Double Magazine Pouch
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
Description: Desert Warrior Products - Double Magazine Pouch
DWP Rating: 10
The rating is on a 1 to 10 scale (10 being the best)
|
Material : Anodized
Aluminum (6061-T6)
Bulb: 3 Watt CREE
100,000 HR Lamp
Life
Power: 130 Lumens
Run Time: 3 hours
Battery: 2 x CR123
Lithium Battery
Included
Size: 5.5" inches
Weight: 6 oz includes
2 battery
Special Feature:
Remote Switch
Tailcap Included
Price: 99.99
Aluminum (6061-T6)
Bulb: 3 Watt CREE
100,000 HR Lamp
Life
Power: 130 Lumens
Run Time: 3 hours
Battery: 2 x CR123
Lithium Battery
Included
Size: 5.5" inches
Weight: 6 oz includes
2 battery
Special Feature:
Remote Switch
Tailcap Included
Price: 99.99
| Tactical Flashlight |
©2010, Desert Warrior Products. All rights reserved. This
entire site with its content is copyright protected. All
images are invisibly watermarked and cannot be used
without explicit agreement from Desert Warrior Products.
High Quality Rifle Accessories
Take your rifle to the next level with the products found on
our site. We are a leading the way with new and innovative
products.
entire site with its content is copyright protected. All
images are invisibly watermarked and cannot be used
without explicit agreement from Desert Warrior Products.
High Quality Rifle Accessories
Take your rifle to the next level with the products found on
our site. We are a leading the way with new and innovative
products.
We Proudly Accept
Knowledgeable Support Call
1-951-847-4558 for expert advice on everything we offer.
Phone Sales (Pacific Standard Time):
Mon - Fri: 9am - 4pm
Saturday: Closed
Sunday: Closed
1-951-847-4558 for expert advice on everything we offer.
Phone Sales (Pacific Standard Time):
Mon - Fri: 9am - 4pm
Saturday: Closed
Sunday: Closed
Other Accessories
Magazines Cleaning Supplies
Forward Rail Replacement Parts
Soft Gases Rings & Accessories
Hard Cases Bi Pods
Slings Cheek Rest
Magazines Cleaning Supplies
Forward Rail Replacement Parts
Soft Gases Rings & Accessories
Hard Cases Bi Pods
Slings Cheek Rest
| New Products |
| Tool House |
| For Knowledgeable Assistance 951-847-4558 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
EOTech Optics
Balastic Drop
For the .308
Balastic Drop
For the .308
 |