| Welcome to Desert Warrior Products: Tactical M1A M14 Cheek Rest Sling . M14 Accessories M1A Accessories |
Vented steel design changes cycle time by letting you adjust
the gas volume in the cylinder. Quick adjustment of vent size
with integral set-screw; eliminates changing screws for different
vent sizes. Reduces battering on op rod, bolt lugs, receiver and
trigger group. Available for M1 Garand and M1A rifles.
SPECS: Steel, parkerized finish. Replaces existing gas nut with
no modifications to the rifle. Includes adjustment tool and
instructions.
the gas volume in the cylinder. Quick adjustment of vent size
with integral set-screw; eliminates changing screws for different
vent sizes. Reduces battering on op rod, bolt lugs, receiver and
trigger group. Available for M1 Garand and M1A rifles.
SPECS: Steel, parkerized finish. Replaces existing gas nut with
no modifications to the rifle. Includes adjustment tool and
instructions.
49.99
Douglas Premium Blanks Contoured & Threaded To Fit The M1A & M14
Drop-in barrels, fully threaded and contoured with all relief cuts made, polished and left in-the-white,
ready for finishing. Beautifully made from Douglas Premium Blanks. Chambers are .050" “short” so the
gunsmith can fit and headspace these barrels to a wide range of receivers. M1A/M14 - Available in both
Heavy Contour with the op-rod guide installed and Medium Contour with no op-rod guide. 1-in-10 twist,
7.62mm (.308 Win) caliber, 4-groove or 6-groove rifling.
SPECS: M1A/M14 Medium Wt. 2 lb. 14 oz. (1.3 kg), Heavy Wt. 3 lb. 9 oz. (1.6 kg).
Drop-in barrels, fully threaded and contoured with all relief cuts made, polished and left in-the-white,
ready for finishing. Beautifully made from Douglas Premium Blanks. Chambers are .050" “short” so the
gunsmith can fit and headspace these barrels to a wide range of receivers. M1A/M14 - Available in both
Heavy Contour with the op-rod guide installed and Medium Contour with no op-rod guide. 1-in-10 twist,
7.62mm (.308 Win) caliber, 4-groove or 6-groove rifling.
SPECS: M1A/M14 Medium Wt. 2 lb. 14 oz. (1.3 kg), Heavy Wt. 3 lb. 9 oz. (1.6 kg).
|
|
Diffuses Recoil; Practice Shooting Longer With Less Pain
All of the parts, tools and instructions necessary to replace the M1A
flash suppressor with a recoil reducing muzzle brake/stabilizer.
Combination of front baffles and side vent holes reduce felt recoil and
muzzle rise, replaces the sharp kick with a gentle push. Features a solid
bottom to prevent dust printing. Includes muzzle brake/stabilizer, hex
wrenches and Castle nut pliers for quick and easy replacement.
SPECS: Steel, black, matte finish. 4¼" (10.7cm) long.
All of the parts, tools and instructions necessary to replace the M1A
flash suppressor with a recoil reducing muzzle brake/stabilizer.
Combination of front baffles and side vent holes reduce felt recoil and
muzzle rise, replaces the sharp kick with a gentle push. Features a solid
bottom to prevent dust printing. Includes muzzle brake/stabilizer, hex
wrenches and Castle nut pliers for quick and easy replacement.
SPECS: Steel, black, matte finish. 4¼" (10.7cm) long.
|
When it's time to do more than a tune up look to all new Desert
Warrior Products Performance Spring Kit to upgrade your tired
M1A or M14. Fits all models of the M14 and M1A rifles. Kit
contains (1) extra-power recoil spring, (1) extra-power hammer
spring, (1) ejector spring and (1) extractor spring.
Warrior Products Performance Spring Kit to upgrade your tired
M1A or M14. Fits all models of the M14 and M1A rifles. Kit
contains (1) extra-power recoil spring, (1) extra-power hammer
spring, (1) ejector spring and (1) extractor spring.
|
Compact accessory rail clamps directly to scope tube to provide
mounting space for holographic sights, lasers, IR illuminators,
flashlights, and other accessories that fit Weaver-style rails. Increases
accessory mounting options, especially on bolt guns, without restricting
your scope base and ring options. Short enough not to interfere with
rings, turret, or scope objective, yet provides adequate rail length to
accept a wide variety of devices. Rail mounts at any angle on the scope
tube and positions alternate sight close to the scope axis, so switching
between main and secondary sights requires minimal head movement.
Models to fit 1" and 30mm scope tubes. 1" and 30mm models may also
be installed on magazine tubes of tactical shotguns. Made of
lightweight, precision machined aluminum and hardcoat anodized for
added strength to withstand the pounding of recoil without losing
adjustment. ab
SPECS: Machined aluminum, hardcoat anodized, matte black. 1¾” (4.5
cm) rail length. 1” - 1 oz. (28g) weight. 30mm - 1.1 oz. (32g) weight.
34mm - 1.2 oz. (34g) weight. Hex wrench included.
mounting space for holographic sights, lasers, IR illuminators,
flashlights, and other accessories that fit Weaver-style rails. Increases
accessory mounting options, especially on bolt guns, without restricting
your scope base and ring options. Short enough not to interfere with
rings, turret, or scope objective, yet provides adequate rail length to
accept a wide variety of devices. Rail mounts at any angle on the scope
tube and positions alternate sight close to the scope axis, so switching
between main and secondary sights requires minimal head movement.
Models to fit 1" and 30mm scope tubes. 1" and 30mm models may also
be installed on magazine tubes of tactical shotguns. Made of
lightweight, precision machined aluminum and hardcoat anodized for
added strength to withstand the pounding of recoil without losing
adjustment. ab
SPECS: Machined aluminum, hardcoat anodized, matte black. 1¾” (4.5
cm) rail length. 1” - 1 oz. (28g) weight. 30mm - 1.1 oz. (32g) weight.
34mm - 1.2 oz. (34g) weight. Hex wrench included.
|
The Devtron Scopecoat™ is constructed of the highest quality
neoprene (6mm thick) laminated with nylon. Its simple design
safeguards any kind of scope from dings and scratches, dust, dirt, and
moisture. The shock and moisture absorbing Neoprene helps draw
moisture and condensation away from your scope and helps protect it
from the elements. Our standard Scopecoat™ is available in Black,
Camouflage and Olive Drab Green unless otherwise noted. XP-6 Flak
Jacket Scopecoat™ is available in Black only.
Scopecoat™ stretches approximately 10% and the correct fit is either
relaxed or snug. Scopecoat™ fits a variety of scopes and when
choosing the right size Scopecoat™, measure your scopes overall
length in inches and the objective in millimeters.
neoprene (6mm thick) laminated with nylon. Its simple design
safeguards any kind of scope from dings and scratches, dust, dirt, and
moisture. The shock and moisture absorbing Neoprene helps draw
moisture and condensation away from your scope and helps protect it
from the elements. Our standard Scopecoat™ is available in Black,
Camouflage and Olive Drab Green unless otherwise noted. XP-6 Flak
Jacket Scopecoat™ is available in Black only.
Scopecoat™ stretches approximately 10% and the correct fit is either
relaxed or snug. Scopecoat™ fits a variety of scopes and when
choosing the right size Scopecoat™, measure your scopes overall
length in inches and the objective in millimeters.
Adjustable - Gas Plug For The M1A & M14
Douglas - Premium Barrels -For M1A & M14
Springfield Armory - Muzzle Break, Castle Nut
Plyers, Hex Wrenches - M1A & M14
Plyers, Hex Wrenches - M1A & M14
DWP High Performance Replacement Springs -
M1A & M14
M1A & M14
Attach A Red Dot To Your Scope and Be Ready
For Everything
For Everything
Protect Your Investment With A ScopeCoat
|
Three times thicker than a standard Scopecoat; gives extra protection for scopes with tall
adjustment turrets. Black Only!
adjustment turrets. Black Only!
How To Order: Measure overall length of scope and then determine Scope Size: Example -
CNC-machined from a solid billet of 6061-T6
aluminum, the Troy Battle Rail is designed to
significantly enhance all combat-relevant aspects,
including reliability, accuracy, and tactical
accessory-mounting capability.
The MCS, of course, features an integral
Mil-Std-1913 "Picatinny" Quad Rail / Forend Rail
tube for mounting tactical rifle accessories,
including combat optics, lasers, tactical white
lights, vertical foregrips, etc. The top rail is a
full-length rail.
Features:
TROY M14 BattleRails work with your existing
M1A/M14 rifle stock. They provide the ultimate
optics mounting system and interface for other
accessories.
- Works with all wood and fiberglass stock systems
- Accepts all accessories designed for the M1913
Picatinny rail system,
- All optics stay attached during field stripping and
cleaning
- Easily installs with no special tools
- Increases weapon accuracy by providing a more
solid optics mounting system
aluminum, the Troy Battle Rail is designed to
significantly enhance all combat-relevant aspects,
including reliability, accuracy, and tactical
accessory-mounting capability.
The MCS, of course, features an integral
Mil-Std-1913 "Picatinny" Quad Rail / Forend Rail
tube for mounting tactical rifle accessories,
including combat optics, lasers, tactical white
lights, vertical foregrips, etc. The top rail is a
full-length rail.
Features:
TROY M14 BattleRails work with your existing
M1A/M14 rifle stock. They provide the ultimate
optics mounting system and interface for other
accessories.
- Works with all wood and fiberglass stock systems
- Accepts all accessories designed for the M1913
Picatinny rail system,
- All optics stay attached during field stripping and
cleaning
- Easily installs with no special tools
- Increases weapon accuracy by providing a more
solid optics mounting system
Desert Warrior Products - Troy Industries Battle Rail
The Troy Battle Rail is available in two
colors: Tactical Black and Dark Earth
(a.k.a. Coyote Brown).
colors: Tactical Black and Dark Earth
(a.k.a. Coyote Brown).
|
Less money than a quality scope mount and forward rail and becomes a better system.
| New Products |
| Tool House |
| For Knowledgeable Assistance 951-847-4558 |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
EOTech Optics
Balastic Drop
For the .308
Balastic Drop
For the .308
 |
©2010, Desert Warrior Products. All rights reserved. This
entire site with its content is copyright protected. All
images are invisibly watermarked and cannot be used
without explicit agreement from Desert Warrior Products.
High Quality Rifle Accessories
Take your rifle to the next level with the products found on
our site. We are a leading the way with new and innovative
products.
entire site with its content is copyright protected. All
images are invisibly watermarked and cannot be used
without explicit agreement from Desert Warrior Products.
High Quality Rifle Accessories
Take your rifle to the next level with the products found on
our site. We are a leading the way with new and innovative
products.
We Proudly Accept
Knowledgeable Support Call
1-951-847-4558 for expert advice on everything we offer.
Phone Sales (Pacific Standard Time):
Mon - Fri: 9am - 4pm
Saturday: Closed
Sunday: Closed
1-951-847-4558 for expert advice on everything we offer.
Phone Sales (Pacific Standard Time):
Mon - Fri: 9am - 4pm
Saturday: Closed
Sunday: Closed